For Canon Pixma Pro 100 setup, read and proceed with the guided instructions given below.
Before you begin the printer hardware setup process, check if the printer is unboxed properly.
Place the printer on a table to begin the setup process.
Plugin the power cord into the Canon Pixma Pro 100 printer and turn it On.
Wait for the Canon printer to become idle and silent.
Once the printer becomes idle, open the top door, and wait for the carriage to reach the access point.
Now, unpack the ink cartridge provided with the printer.
Make sure to remove the orange caps from the cartridge.
Place the unpacked cartridges into the printer.
If the red light displays on the ink tank, then it confirms that the cartridge is installed properly.
Close the top door of the Canon Pixma Pro 100 setup printer.
After a few seconds, connect your Canon printer to the Windows or Mac system.
On your system, start the Canon Pixma Pro 100 driver installation.
Connect your Canon printer and the computer through a wired or wireless network.
If you wish to connect the Canon printer and your computer through the wired network, then get a USB A to B cable no longer than 5 meters from a trusted retail store, since the USB cable is not provided with the printer package.
Connect the printer and your computer using the USB cable when prompted during the driver installation.
If you wish to connect the Canon printer and your computer through a wireless network, then switch on your Wi-Fi router, and follow the instructions given below.
Press & hold the Wi-Fi button on the printer for a few seconds.
Once the blue Wi-Fi light starts to flash, navigate to the access point & locate the WPS button.
Press the WPS button within 2 minutes.
Perform the on-screen instructions to finish the setup process.
Once the driver installation is done successfully, try a test print or scan operation on your Canon printer to check its functions.
You can contact our printer technical experts if you face any issue during the Canon Pixma Pro 100 setup.
To contact our printer technical experts, click the Call button available on this screen.
CANON PIXMA PRO 100 SETUP WITHOUT CD
You can download the print driver from the Canon printer’s official site to set up the printer without using the installation CD.
Click the Driver Download button on this site to download the driver for your printer model.
Else, go to the Canon printer’s official site and look for the Canon Pixma pro 100 driver that suits your operating system.
Click the Download button after choosing the Canon pixma pro 100 driver file.
Once the printer driver is downloaded successfully, start the installation.
Choose an appropriate connection type when prompted.
Make sure to do the setup as per the instructions displayed on the screen.
After finishing the Canon Pixma Pro 100 setup process, try a test print.
CANON PIXMA PRO 100 DRIVER
The use of a print driver is converting the information that is supposed to be printed or scanned into a format that the printer can understand. In most of the cases, the driver of the printer is provided with the package. If you want the latest version of the print driver, then you can download it from the Canon printer’s official site.
CANON PIXMA PRO 100 DRIVER WINDOWS 10
To download and install the Canon Pixma Pro 100 printer driver on your Windows 10 system, follow the step-by-step instructions given below.
Canon Pixma Pro 100 driver downloading procedures:
Navigate to the Canon printer’s official site from your system browser.
Click the Support button on the main screen of the Canon printer.
Select the Printers option in the Browse by Product Type section.
Tap the Pro Series option in the Pixma section.
Choose the PRO- 100 option in the Pro Series section.
Now the Canon Pixma Pro 100 printer web page will appear on the screen.
Scroll down the screen and click on the Canon Pixma pro 100 Drivers & Downloads tab.
Choose your system’s OS type and language from the drop-down menu.
Click the Select button followed by Download.
Wait for the download process to complete.
CANON PIXMA PRO 100 DRIVER MAC
Canon Pixma Pro 100 printer driver installation instructions:
Once the print driver is downloaded successfully, open it to begin the installation.
Tap the Next button on the main screen.
Choose the Wireless connection type on the Connection Method Selection screen.
Click the Connect to the network button when prompted beside the Start setup option.
Choose your Place of Residence from the drop-down menu.
Perform the on-screen instructions to complete the Canon Pixma pro 100 driver installation process.
Once the installation is done, try a test print on your Canon Pixma Pro 100 setup printer.
CANON PIXMA PRO 100 LINUX DRIVER
Perform the following guidelines to download Canon Pixma pro 100 driver for Linux operating system.
First, go to the manufacturer site and enter the printer series number in the search field. Click the Search option.
Now, click the Drivers & Downloads option from the available list.
Next, select the Operating System that you are using from the first drop-down list, that is Linux.
From the second drop-down list, select the Language.
Click the Download option and select a destination to save the downloading file.
Once the Canon Pixma Pro 100 setup printer driver file has been downloaded, double-click the file and select to run and install the driver.
HOW TO INSTALL CANON PIXMA PRO 100 ON MAC
Proceed with the following steps to install Canon Pixma pro 100 on Mac.
First, insert the CD that came with the Canon Pixma pro 100 printer and then run the setup.
Next, double-click the Canon_IJ icon on the desktop.
The selection window will open.
Now, begin the software download by clicking the Setup option to install Canon Pixma pro 100 on mac.
Once the initial screen appears, click the Next option.
Choose Wireless Connection as the connection method.
Make sure that the Canon Pixma Pro 100 printer is turned on and then check whether the LED is on and then click Next.
On the next screen, click Connect to the Network.
When the Canon Pixma Pro 100 setup Procedure Selection screen appears, click Wireless Setup Using the USB cable.
Next, choose your region and click Next to install Canon Pixma pro 100 on mac.
On the next screen, choose your language and then click Next.
The next screen will consist of the software installation list.
Choose the software that you want to install and then click Next.
Next, click Yes to agree to the End User License Agreement.
Now, plug the USB cable to the Canon Pixma pro 100 to the computer using the USB cable delivered along with the printer.
Once the printer has been recognized, make sure to confirm the connection access point.
Click Yes to select the wireless network that you want to connect to install Canon Pixma pro 100 on mac.
Next, click Allow and disconnect the Canon Pixma pro 100 from the computer and then click Next.
Click Yes to confirm your printer name. The name of your network will be displayed.
Now the Add Printer screen appears.
Click the Add Printer option to the printer to your Mac OS.
On the next screen, choose the Canon IJ Network driver version and click Add.
The installation of Canon Pixma Pro 100 setup printer on Mac is now done.
HOW TO PRINT WITH CANON PIXMA PRO 100
Perform the following guidelines to print with Canon Pixma pro 100 setup printer.
First, turn on the Canon Pixma Pro 100 printer.
Next, check whether you have downloaded and installed the required printer software,
If not, go to the manufacturer’s site and download the necessary software.
Access the paper support cassette and draw it out to print with Canon Pixma pro 100.
Now, draw the extension tray of the paper output and adjust the paper guides.
Place a single sheet of paper in the input tray with the print side facing up.
Arrange the paper width guides according to the paper size that you have loaded.
Go to the Canon printer driver setup window and set the printer settings such as the Resolution, page size, color of the print, etc.
Now, open the document or the picture that you want to print.
Next, change the required settings in the Properties dialogue box to print with Canon Pixma pro 100.
Select the printer model that is Pixma Pro 100.
Click the Print option, and the Canon Pixma pro 100 will start to print the selected item.
CANON PIXMA PRO 100 WIRELESS SETUP
Perform the following guidelines for Canon Pixma Pro 100 wireless setup.
WPS Connection method.
Ensure that the Canon Pixma pro 100 printer and your router are powered on.
Long-press the Wi-Fi button until the white LED light flashes once and then release it.
Next, check whether the Wi-Fi LED begins to blink. Move to the access point and then long-press the WPS button.
Next, confirm the Network configuration settings for Canon Pixma pro 100 wireless setup.
Place the A4 sheet or the letter-sized paper in the input tray.
Now, press the Resume or the Cancel button until the white LED light flashes 6 times and then release it.
The network configuration page will be printed on Canon Pixma Pro 100 setup printer.
The Canon Pixma pro 100 wireless setup is completed.