Instant 123.hp.com/oj6962 Printer Setup

HP ePrint supported Duplex Printer

Download 123.hp.com/setup 6962 Driver and Manual

HP Officejet 6962 Driver Download

Download Driver for Windows

HP Officejet 6962 Driver

Download Driver for Mac

HP Officejet 6962 Manual

Download Manual


123 HP Officejet 6962 Setup

  • Unbox your 123.hp.com/oj6962 printer.
  • Discard all tapes and packing materials from your 123 HP Officejet 6962 printer.
  • Ensure that you remove the sticker on the printer’s control panel.
  • Lift the scanner lid and then discard the packing material from your printer.
  • Close the HP Officejet 6962 Setup printer scanner lid properly.
  • Lift the 123.hp.com/setup 6962 output tray, pull the input tray, and remove the packing material from the tray.
  • Push the input tray front until it snaps into its place, and then lower the 123.hp.com/oj6962 output tray.
123.hp.com/setup 6962
  • Connect the power cable to the rear of your 123.hp.com/setup 6962 printer, and then plug the other side of the cable into an electrical outlet.
  • Turn on your printer.
  • On the 123.hp.com/oj6962 printer’s control panel, set your preferred language and country, and then touch Yes to confirm your choice.
  • Now a window will prompt select the date and time and then touch Yes to confirm.
  • Install the ink cartridges that came along with your printer.
  • Open the ink cartridge access door.
  • Wait until the carriage is back to its original position before you continue the process.
  • Remove the packing material from the carriage.
  • Remove the new cartridge from the package, and then pull the orange tape back. Hold the ink cartridge by its sides. Do not touch the copper-colored contacts as doing so will result in ink failure.
  • Push the ink cartridge downwards.
  • Slide the ink cartridge into its slot. The black color cartridge on the right and the tri-color cartridge on the left slot. Then gently press the ink cartridge down until it seats into place. Follow these steps to install all the new ink cartridge.
  • Close the ink cartridge access door.
  • Load sufficient paper into the HP Officejet 6962 Setup printer input tray after installing the ink cartridge.
  • Lift the 123.hp.com/setup 6962 output tray, and then pull the input tray toward you to open it.
  • Move the paper width guide to its outermost position.
  • Push the input tray forward until it snaps into place.
  • Install the 123.hp.com/oj6962 printer software from our website.
  • In the search tab, enter the printer model and install the HP Officejet 6962 driver software according to your operating system.

How to Download HP Officejet 6962 Driver Software?

  • Launch a web browser on your computer.
  • Type in our website URL in the search field.
  • Now a window will prompt, in the search bar type in your 123.hp.com/oj6962 printer model.
  • Now the list of the available driver for your HP Officejet 6962 Setup printer will be displayed.
  • Select the driver as per your operating system. If you are using Windows, select Windows and choose the version of your operating system.
  • If you are using Mac, select Mac as your operating system and choose the version as well.
  • After selecting the HP Officejet 6962 driver, click the download button.
  • A window prompts you to select the location where you want to save the file. Choose the location to save.
  • The file format to save in windows is .exe.
  • The file format to save in Mac is .dmg.
  • Double-click on the downloaded file.
  • An 123.hp.com/setup 6962 printer Installation Wizard will open.
  • Click Run.
  • Wait until the update is complete.
  • Choose the type of connection.
  • Accept the license agreement to continue the process.
  • Click Finish.
HP Officejet 6962 Setup

How to Install HP Officejet 6962 Printer Driver Software?

HP Officejet 6962 Driver Install Windows

Follow these steps to install the HP OfficeJet 6962 Driver on your Windows device.

  • Tap the CD tray button to allow the tray to slide out of the CPU.
  • Place the installation CD on the tray and push it in.
  • After the CD is read by the computer, a prompt appears on the screen.
  • Follow the instructions on the screen and agree to the Terms & Conditions.
  • Disconnect the 123.hp.com/oj6962 printer from the computer if it is connected and connect it only when you see the prompt on the screen.
  • Check whether your printer is listed on your computer’s Devices list.
  • Go to the Search bar on our site and type your HP Officejet 6962 Setup printer’s model number.
  • Now, download the HP Officejet 6962 driver from the Downloads section and double-click it.
  • Repeat the steps from 3.
  • Test print a document on your 123.hp.com/setup 6962 printer.

HP Officejet 6962 Driver Install Mac

Since the new generation of Macs do not come with a CD tray, there is an easy way to install the 123.hp.com/oj6962 driver from the installation CD.

  • From another computer, copy the Driver from the CD to a USB flash drive.
  • Connect the USB flash drive with the Driver to the CPU.
  • When the Driver prompt appears on the screen, follow the HP Officejet 6962 Setup printer installation instructions.
  • Agree to the Terms & Conditions when they appear on the screen
  • Check whether the 123.hp.com/setup 6962 printer is receiving power.
  • Connect the HP OJ6962 printer to your Mac device when prompted.
  • After the installation is complete, click the Apple icon on your computer.
  • Go to the System Preferences ---> Print & Fax----> check whether your printer is listed.
  • If so, you can go ahead and perform a test print.

How to Download HP Officejet 6962 User Manual?

HP Officejet 6962 manual download

The 123.hp.com/oj6962 printer manual can be downloaded in a few steps. Follow these simple guidelines to download the manual from our site.

  • Move your cursor to the Search field on the top of the site.
  • Type the 123.hp.com/setup 6962 model in the Search field and press Enter.
  • Navigate to the Manual section after the page loads.
  • Click the Download button to download the manual on your computer.
  • Select the directory where you want the file to be saved.
  • Double-click the file to read it. You can use the default PDF program to open the file.
  • Now you can navigate to the specific topic of HHP Officejet 6962 Setup by checking the ../index page.
  • As an alternative, you can use the page numbers to navigate to the required content.
  • Transfer the 123.hp.com/oj6962 manual to a USB flash drive and take it wherever you go.

Related HP Officejet Models