Get Total 123.hp.com/dj3700 Printer Setup

• Verify the supplies inside the box: First, ensure that the manufacturer’s seal is present on top of the 123.hp.com/dj3700carton.
• After opening the package, take the installation disk, ink cartridges, warranty card, and other accessories out of it.
• Check whether all the components are available.
• Remove the 123.hp.com/setup 3700 printer from the box: Once you lift the HP Deskjet 3700 printer from the shipment package, make sure that you keep it on a dust-free, stable surface.
• Discard the plastic wrap from the Hewlett Packard device. After all the packing materials and tapes are removed, recycle the same.
• Establish the power connection: An electrical cable is delivered along with the model of your Hewlett Packard device in the package, use it for setting up the power connection.
• Locate the power port on your 123.hp.com/dj3700 printer and then connect the electrical cable to it.
• The other end of the electrical cable must be connected to a wall outlet or electrical socket.
• Make sure that you do use a surge protector film or strip when the power connection is established.
• The Deskjet 3700 printer powers up after the Power button is force pressed. When the printer is powered up for the first time, it will produce noises.
• Wait until the Hewlett Packard device remains silent.
• Install the cartridges: A pack of ink cartridges is shipped with the Deskjet 370 printer in the carton.
• It is essential to use cartridges that are compatible with the model of your HP printer.
• Issues might occur in the printer if you do not install 123.hp.com/setup 3700 printer compatible ink cartridges.
• The carriage located inside the device will move to the center area after the HP Deskjet 3700 Setup printer cartridge access door is opened.
• The cartridges must be installed only after the carriage does not make any sound.
• Take the new cartridges out of their package. You must use only the black plastic area that is available on the cartridge.
• Make sure to remove the plastic tape from the ink cartridge. Handle the cartridge by the sides and with the contacts on it facing your 123.hp.com/dj3700 printer.

• Place the cartridge in its position and push until it gets seated firmly.
• Ensure that the black (right) and tri-color (left) cartridges are kept in the correct slots.
• Lower the access door on your 123.hp.com/dj3700 printer. Now the HP Printer will go through an initialization process, wait for it to complete.
• Insert plain paper into the input tray: Lift the main input tray and the input tray extender.
• Move the input tray shield back and keep holding it. You must move the paper width guides towards the left side.
• Now the input tray shield must be released. Place up to sixty sheets of white paper into the main input tray.
• Move the sheets of plain paper until they reach the ends of the 123.hp.com/setup 3700 printer main input tray.
• Hold the input tray shield and then move the width guides to the right side until they reach the edges of the document.
• Now release the input tray shield. Pull the output tray and the output tray extender out for HP Deskjet 3700 Setup.
• Complete the loading process by raising the paper catch on 123.hp.com/dj3700 printer.

• A printer driver is a software that acts as an interface between the Mac or Windows personal computer and the HP Deskjet 3700 printer.
• Based on your requirements, the Full Feature or the Basic driver package can be downloaded.
• The basic software can be utilized for carrying out primary functions of HP Deskjet 3700 Setup printer such as scanning and printing.
• The tools such as HP Photo Creations and OCR are included in the full feature software.
• The latest driver for your 123.hp.com/setup 3700 printer is available on our web page.
• Confirm that your personal computer has enough memory space for downloading the HP Deskjet 3700 driver.
• Use an active Internet connection to download the software. Start the 123.hp.com/dj3700 printer download process by clicking the Driver Download button from this site.

• Ascertain the Mac or Windows device is not switched off when the download is in progress.
• After downloading 123.hp.com/setup 3700 printer driver, the file can be accessed from the browser or Downloads location on your system.
• If you are not able to download the 123.hp.com/dj3700 printer software, contact our tech support team.

HP DEskjet 3700 Driver Install Mac

• The 123.hp.com/setup 3700 Easy Start software will be available on your Mac system after the HP Deskjet 3700 Driver Download button is selected from this site.
• You must install the HP Easy Start software for establishing the communication between the Mac PC and the 123.hp.com/dj3700 printer.
• Now, navigate to the Downloads location on the Mac desktop and then double-click on the appropriate downloaded HP Deskjet 3700 Setup file.
• The Welcome to HP Easy Start window will display on your Mac screen.
• First, agree to all the agreements and settings and then select the Continue button.
• Keep performing the prompts that appear on your Mac system.
• Choose the Next button, and when you are prompted to enter the admin password, do the same.
• On the Install pop up box, you can select the additional software that you need.
• Wait until the software gets downloaded and then carry out the prompts on the Mac personal computer.
• Choose your HP Deskjet 3700 printer and then click on the Finish button for completing the HP Deskjet 3700 driver installation process.

You can download the manual of your D123.hp.com/setup 3700 printer for free from this web page. The best instructions regarding processes that can be done by the Hewlett Packard device are available in the user guide. To initiate the HP Deskjet 3700 Setup printer manual downloading process, find and click on the Manual Download option on this site. The downloaded 123.hp.com/dj3700 manual file can be accessed from the Downloads folder of your computer or web page directly.